From 71a5db2f26d1ac01c8e897d9362a09956c02bbc3 Mon Sep 17 00:00:00 2001
From: Tim Keller <tjk@tjkeller.xyz>
Date: Sat, 30 May 2026 21:39:56 -0500
Subject: klipper config on gnuslashprinter for ender 3 neo

---
 hosts/gnuslashprinter/resources/klipper/mcu/config | 109 +++++++++++++++++++++
 1 file changed, 109 insertions(+)
 create mode 100644 hosts/gnuslashprinter/resources/klipper/mcu/config

(limited to 'hosts/gnuslashprinter/resources/klipper/mcu/config')

diff --git a/hosts/gnuslashprinter/resources/klipper/mcu/config b/hosts/gnuslashprinter/resources/klipper/mcu/config
new file mode 100644
index 0000000..3e192a3
--- /dev/null
+++ b/hosts/gnuslashprinter/resources/klipper/mcu/config
@@ -0,0 +1,109 @@
+# CONFIG_LOW_LEVEL_OPTIONS is not set
+# CONFIG_MACH_AVR is not set
+# CONFIG_MACH_ATSAM is not set
+# CONFIG_MACH_ATSAMD is not set
+# CONFIG_MACH_LPC176X is not set
+CONFIG_MACH_STM32=y
+# CONFIG_MACH_HC32F460 is not set
+# CONFIG_MACH_RPXXXX is not set
+# CONFIG_MACH_PRU is not set
+# CONFIG_MACH_AR100 is not set
+# CONFIG_MACH_LINUX is not set
+# CONFIG_MACH_SIMU is not set
+CONFIG_BOARD_DIRECTORY="stm32"
+CONFIG_MCU="stm32f103xe"
+CONFIG_CLOCK_FREQ=72000000
+CONFIG_SERIAL=y
+CONFIG_FLASH_SIZE=0x10000
+CONFIG_FLASH_BOOT_ADDRESS=0x8000000
+CONFIG_RAM_START=0x20000000
+CONFIG_RAM_SIZE=0x5000
+CONFIG_STACK_SIZE=512
+CONFIG_FLASH_APPLICATION_ADDRESS=0x8007000
+CONFIG_STM32_SELECT=y
+CONFIG_MACH_STM32F103=y
+# CONFIG_MACH_STM32F207 is not set
+# CONFIG_MACH_STM32F401 is not set
+# CONFIG_MACH_STM32F405 is not set
+# CONFIG_MACH_STM32F407 is not set
+# CONFIG_MACH_STM32F429 is not set
+# CONFIG_MACH_STM32F446 is not set
+# CONFIG_MACH_STM32F765 is not set
+# CONFIG_MACH_STM32F031 is not set
+# CONFIG_MACH_STM32F042 is not set
+# CONFIG_MACH_STM32F070 is not set
+# CONFIG_MACH_STM32F072 is not set
+# CONFIG_MACH_STM32G070 is not set
+# CONFIG_MACH_STM32G071 is not set
+# CONFIG_MACH_STM32G0B0 is not set
+# CONFIG_MACH_STM32G0B1 is not set
+# CONFIG_MACH_STM32G431 is not set
+# CONFIG_MACH_STM32G474 is not set
+# CONFIG_MACH_STM32H723 is not set
+# CONFIG_MACH_STM32H743 is not set
+# CONFIG_MACH_STM32H750 is not set
+# CONFIG_MACH_STM32L412 is not set
+# CONFIG_MACH_N32G452 is not set
+# CONFIG_MACH_N32G455 is not set
+CONFIG_MACH_STM32F1=y
+CONFIG_HAVE_STM32_USBFS=y
+CONFIG_STM32_USB_DOUBLE_BUFFER_TX=y
+CONFIG_HAVE_STM32_CANBUS=y
+CONFIG_STM32_DFU_ROM_ADDRESS=0
+# CONFIG_STM32_FLASH_START_2000 is not set
+# CONFIG_STM32_FLASH_START_5000 is not set
+CONFIG_STM32_FLASH_START_7000=y
+# CONFIG_STM32_FLASH_START_8000 is not set
+# CONFIG_STM32_FLASH_START_8800 is not set
+# CONFIG_STM32_FLASH_START_9000 is not set
+# CONFIG_STM32_FLASH_START_10000 is not set
+# CONFIG_STM32_FLASH_START_800 is not set
+# CONFIG_STM32_FLASH_START_1000 is not set
+# CONFIG_STM32_FLASH_START_4000 is not set
+# CONFIG_STM32_FLASH_START_0000 is not set
+CONFIG_CLOCK_REF_FREQ=8000000
+CONFIG_STM32F0_TRIM=16
+# CONFIG_STM32_USB_PA11_PA12 is not set
+CONFIG_STM32_SERIAL_USART1=y
+# CONFIG_STM32_CANBUS_PA11_PA12 is not set
+# CONFIG_STM32_CANBUS_PA11_PB9 is not set
+CONFIG_SERIAL_BAUD=250000
+CONFIG_USB_VENDOR_ID=0x1d50
+CONFIG_USB_DEVICE_ID=0x614e
+CONFIG_USB_SERIAL_NUMBER="12345"
+CONFIG_WANT_ADC=y
+CONFIG_WANT_SPI=y
+CONFIG_WANT_SOFTWARE_SPI=y
+CONFIG_WANT_I2C=y
+CONFIG_WANT_SOFTWARE_I2C=y
+CONFIG_WANT_HARD_PWM=y
+CONFIG_WANT_BUTTONS=y
+CONFIG_WANT_TMCUART=y
+CONFIG_WANT_NEOPIXEL=y
+CONFIG_WANT_PULSE_COUNTER=y
+CONFIG_WANT_ST7920=y
+CONFIG_WANT_HD44780=y
+CONFIG_WANT_ADXL345=y
+CONFIG_WANT_LIS2DW=y
+CONFIG_WANT_MPU9250=y
+CONFIG_WANT_ICM20948=y
+CONFIG_WANT_THERMOCOUPLE=y
+CONFIG_WANT_HX71X=y
+CONFIG_WANT_ADS1220=y
+CONFIG_WANT_LDC1612=y
+CONFIG_WANT_SENSOR_ANGLE=y
+CONFIG_NEED_SENSOR_BULK=y
+CONFIG_WANT_LOAD_CELL_PROBE=y
+CONFIG_NEED_SOS_FILTER=y
+CONFIG_CANBUS_FREQUENCY=1000000
+CONFIG_INLINE_STEPPER_HACK=y
+CONFIG_HAVE_STEPPER_OPTIMIZED_BOTH_EDGE=y
+CONFIG_WANT_STEPPER_OPTIMIZED_BOTH_EDGE=y
+CONFIG_HAVE_GPIO=y
+CONFIG_HAVE_GPIO_ADC=y
+CONFIG_HAVE_GPIO_SPI=y
+CONFIG_HAVE_GPIO_I2C=y
+CONFIG_HAVE_GPIO_HARD_PWM=y
+CONFIG_HAVE_STRICT_TIMING=y
+CONFIG_HAVE_CHIPID=y
+CONFIG_HAVE_BOOTLOADER_REQUEST=y
-- 
cgit v1.2.3