diff options
Diffstat (limited to 'rules/smartctl.yml')
| -rw-r--r-- | rules/smartctl.yml | 38 |
1 files changed, 19 insertions, 19 deletions
diff --git a/rules/smartctl.yml b/rules/smartctl.yml index dafed8d..3982e06 100644 --- a/rules/smartctl.yml +++ b/rules/smartctl.yml @@ -5,7 +5,7 @@ # # The fleet is mixed: SATA drives expose the classic ATA attribute table, SAS drives # expose none of it and report health through SCSI error counters instead. Every rule -# below is therefore made *total* -- it ends in `or (count by (device) (...) * 0)` so +# below is therefore made *total* -- it ends in `or (count by (host, device) (...) * 0)` so # that each series exists with value 0 for every drive, including drives of the other # kind. Without that, the arithmetic in smartctl:health_code would silently drop drives # whose label sets did not match on both sides. @@ -20,12 +20,12 @@ groups: # fails", so those are excluded rather than treated as an instant failure. - record: smartctl:attr_failing:count expr: | - count by (device) ( + count by (host, device) ( smartctl_device_attribute{attribute_value_type="value"} - <= on(device, attribute_id) + <= on(host, device, attribute_id) (smartctl_device_attribute{attribute_value_type="thresh"} > 0) ) - or (count by (device) (smartctl_device_smart_status) * 0) + or (count by (host, device) (smartctl_device_smart_status) * 0) # Attributes whose raw value is a genuine warning sign across vendors: # 5 Reallocated_Sector_Ct 187 Reported_Uncorrect @@ -35,13 +35,13 @@ groups: # values on Seagate drives by design and would flag healthy disks. - record: smartctl:attr_caution:count expr: | - count by (device) ( + count by (host, device) ( smartctl_device_attribute{ attribute_value_type="raw", attribute_id=~"5|187|188|197|198|199" } > 0 ) - or (count by (device) (smartctl_device_smart_status) * 0) + or (count by (host, device) (smartctl_device_smart_status) * 0) # --- SAS / SCSI ----------------------------------------------------------- # Grown defect list: sectors reallocated since the drive left the factory. The @@ -49,15 +49,15 @@ groups: # acting on. - record: smartctl:scsi_defects:count expr: | - sum by (device) (smartctl_scsi_grown_defect_list) - or (count by (device) (smartctl_device_smart_status) * 0) + sum by (host, device) (smartctl_scsi_grown_defect_list) + or (count by (host, device) (smartctl_device_smart_status) * 0) # Errors the drive could not correct at all, which means data was lost. - record: smartctl:scsi_uncorrected:count expr: | - sum by (device) (smartctl_read_total_uncorrected_errors) - + sum by (device) (smartctl_write_total_uncorrected_errors) - or (count by (device) (smartctl_device_smart_status) * 0) + sum by (host, device) (smartctl_read_total_uncorrected_errors) + + sum by (host, device) (smartctl_write_total_uncorrected_errors) + or (count by (host, device) (smartctl_device_smart_status) * 0) # --- Verdict -------------------------------------------------------------- # 0 good, 1 caution, 2 bad. The inner clamp_max on each group keeps two @@ -66,7 +66,7 @@ groups: expr: | clamp_max( 2 * clamp_max( - (max by (device) (smartctl_device_smart_status) == bool 0) + (max by (host, device) (smartctl_device_smart_status) == bool 0) + (smartctl:attr_failing:count > bool 0) + (smartctl:scsi_uncorrected:count > bool 0) , 1) @@ -82,9 +82,9 @@ groups: # table, and only SCSI drives report a grown defect list. - record: smartctl:bus expr: | - label_replace(count by (device) (smartctl_device_attribute), "bus", "ata", "", "") + label_replace(count by (host, device) (smartctl_device_attribute), "bus", "ata", "", "") or - label_replace(count by (device) (smartctl_scsi_grown_defect_list), "bus", "sas", "", "") + label_replace(count by (host, device) (smartctl_scsi_grown_defect_list), "bus", "sas", "", "") # The identity string from collectors/smart-selftest.py, made total so a drive # still gets a row if that collector has not written its file yet. `unless` (not @@ -92,11 +92,11 @@ groups: # `or` would emit two series per drive rather than deduplicating. - record: smartctl:ident expr: | - max by (device, label) (smart_drive_label) + max by (host, device, label) (smart_drive_label) or label_replace( - count by (device) (smartctl_device_smart_status) - unless on(device) smart_drive_label, + count by (host, device) (smartctl_device_smart_status) + unless on(host, device) smart_drive_label, "label", "identity pending", "", "") # One preformatted line per drive: "sde · GOOD · 6.0 TB · SAS 7.2K · model · SN". @@ -111,6 +111,6 @@ groups: or label_replace(smartctl:health_code == 1, "verdict", "CAUTION", "", "") or label_replace(smartctl:health_code == 2, "verdict", "BAD", "", "") ) - * on(device) group_left(bus) smartctl:bus - * on(device) group_left(label) smartctl:ident, + * on(host, device) group_left(bus) smartctl:bus + * on(host, device) group_left(label) smartctl:ident, "row", " · ", "device", "verdict", "label") |