klipper config on gnuslashprinter for ender 3 neoHEADmaster

1 files changed, 72 insertions, 0 deletions

diff --git a/hosts/gnuslashprinter/klipper.nix b/hosts/gnuslashprinter/klipper.nix
new file mode 100644
index 0000000..a19261c
--- /dev/null
+++ b/hosts/gnuslashprinter/klipper.nix
@@ -0,0 +1,72 @@
+{
+	# Klipper firmware
+	services.klipper = {
+		enable = true;
+		firmwares = {
+			mcu = {
+				enable = true;
+				# Serial port connected to the microcontroller
+				serial = "/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0";
+				# Klipper flash must be enabled in order to build mcu firmware
+				# The resulting `klipper-flash-mcu` command will show the location of the firmware bin in the nix store
+				enableKlipperFlash = true;
+				# Run klipper-genconf to generate this
+				configFile = ./resources/klipper/mcu/config;
+			};
+		};
+		configFile = ./resources/klipper/printer.cfg;
+		logFile = "/var/lib/klipper/klipper.log";
+	};
+	# Mutable config
+	services.klipper.mutableConfig = true;
+	#configDir = "/var/lib/moonraker/config";  # Accessible by moonraker  # TODO
+
+	# Moonraker web-api
+	services.moonraker = {
+		user = "root";
+		enable = true;
+		address = "0.0.0.0";
+		settings = {
+			#authorization = {
+			#	force_logins = true;
+			#	cors_domains = [
+			#		"*.local"
+			#		"*.lan"
+			#		"*://app.fluidd.xyz"
+			#		"*://my.mainsail.xyz"
+			#	];
+			#	trusted_clients = [
+			#		"10.0.0.0/8"
+			#		"127.0.0.0/8"
+			#		"169.254.0.0/16"
+			#		"172.16.0.0/12"
+			#		"192.168.0.0/16"
+			#		"FE80::/10"
+			#		"::1/128"
+			#	];
+			#};
+			#file_manager.check_klipper_config_path = false;  # Disable warning when klipper config is not accessible by moonraker
+			# mainsail.cfg
+			#"update_manager mainsail-config" = {
+			#	type = "git_repo";
+			#	primary_branch = "master";
+			#	path = "~/mainsail-config";
+			#	origin = "https://github.com/mainsail-crew/mainsail-config.git";
+			#	managed_services = "klipper";
+			#};
+		};
+	};
+
+	# Mainsail web-interface
+	services.mainsail = {
+		enable = true;
+		hostName = "0.0.0.0";
+		nginx.listenAddresses = [ "0.0.0.0" ];
+	};
+	services.nginx.clientMaxBodySize = "1000m";  # Allow large gcodes, etc.
+	networking.firewall.allowedTCPPorts = [ 80 ];  # Port for mainsail via nginx
+
+	# Webcam support in mainsail
+	services.ustreamer.enable = true;
+	services.mainsail.nginx.locations."/webcam/".proxyPass = "http://localhost:8080/stream";  # Default location for ustreamer stream
+}